Performance Test Report
Main information about performance test:
- VyOS version:
1.4.1 - Date:
2025-01-22 11:34 UTC - Traffic generator: TRex
- Traffic test method: ndr
- Traffic packet size:
1518
Test Summary
| Parameter | Measured value |
|---|---|
| Bitrate | 9.27 Gbps |
| Packet rate | 763.03 Kpps |
| Drop Rate | 0.0% |
TRex Device Details
CPU Information
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 46 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 16
On-line CPU(s) list: 0-7
Off-line CPU(s) list: 8-15
Vendor ID: GenuineIntel
Model name: Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz
CPU family: 6
Model: 85
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
Stepping: 4
BogoMIPS: 5999.99
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves ida arat pku ospke
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 256 KiB (8 instances)
L1i cache: 256 KiB (8 instances)
L2 cache: 8 MiB (8 instances)
L3 cache: 24.8 MiB (1 instance)
NUMA node(s): 1
NUMA node0 CPU(s): 0-7
Vulnerability Gather data sampling: Unknown: Dependent on hypervisor status
Vulnerability Itlb multihit: Processor vulnerable
Vulnerability L1tf: Mitigation; PTE Inversion
Vulnerability Mds: Vulnerable; SMT Host state unknown
Vulnerability Meltdown: Vulnerable
Vulnerability Mmio stale data: Vulnerable
Vulnerability Reg file data sampling: Not affected
Vulnerability Retbleed: Vulnerable
Vulnerability Spec rstack overflow: Not affected
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers
Vulnerability Spectre v2: Vulnerable; STIBP: disabled; PBRSB-eIBRS: Not affected; BHI: Vulnerable
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Configuration
- port_limit : 2
version : 2
c : 6
interfaces : ['0000:00:06.0', '0000:00:07.0']
port_info :
- ip : 10.0.11.21
src_mac : '06:40:38:24:33:47'
default_gw : 10.0.11.11
dest_mac : '06:e8:91:41:20:a9'
- ip : 10.0.12.21
src_mac : '06:75:87:50:82:05'
default_gw : 10.0.12.11
dest_mac : '06:ff:9e:d9:7e:47'
platform:
master_thread_id: 0
latency_thread_id: 1
dual_if:
- socket: 0
threads: [2,3,4,5,6,7]
Interfaces Information
Command: sudo ethtool -i enp4s0f0np0
Output:
Command: sudo ethtool -l enp4s0f0np0
Output:
Command: sudo ethtool -g enp4s0f0np0
Output:
Command: sudo ethtool -k enp4s0f0np0
Output:
Command: sudo ethtool -c enp4s0f0np0
Output:
Command: sudo ethtool -i enp4s0f1np1
Output:
Command: sudo ethtool -l enp4s0f1np1
Output:
Command: sudo ethtool -g enp4s0f1np1
Output:
Command: sudo ethtool -k enp4s0f1np1
Output:
Command: sudo ethtool -c enp4s0f1np1
Output:
DUT Details
CPU Information
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 46 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Vendor ID: GenuineIntel
Model name: Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz
CPU family: 6
Model: 85
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
Stepping: 4
BogoMIPS: 6000.01
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch pti fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves ida arat pku ospke
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 64 KiB (2 instances)
L1i cache: 64 KiB (2 instances)
L2 cache: 2 MiB (2 instances)
L3 cache: 24.8 MiB (1 instance)
NUMA node(s): 1
NUMA node0 CPU(s): 0-3
Vulnerability Gather data sampling: Unknown: Dependent on hypervisor status
Vulnerability Itlb multihit: Processor vulnerable
Vulnerability L1tf: Mitigation; PTE Inversion
Vulnerability Mds: Vulnerable: Clear CPU buffers attempted, no microcode; SMT Host state unknown
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Mmio stale data: Vulnerable: Clear CPU buffers attempted, no microcode; SMT Host state unknown
Vulnerability Reg file data sampling: Not affected
Vulnerability Retbleed: Vulnerable
Vulnerability Spec rstack overflow: Not affected
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Retpolines; STIBP disabled; RSB filling; PBRSB-eIBRS Not affected; BHI Retpoline
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
General Information
Version: VyOS 1.4.1
Release train: sagitta
Release flavor: aws
Built by: VyOS Networks Iberia S.L.U.
Built on: Thu 19 Dec 2024 16:04 UTC
Build UUID: 954ce8be-f8e2-4f9a-ad94-6c263e17544a
Build commit ID: 98c72c5c45a7a1-dirty
Architecture: x86_64
Boot via: installed image
System type: KVM guest
Hardware vendor: Amazon EC2
Hardware model: c5n.xlarge
Hardware S/N: ec22f731-8598-51a8-f7d8-dcab92cb2bab
Hardware UUID: ec22f731-8598-51a8-f7d8-dcab92cb2bab
Copyright: VyOS maintainers and contributors
Interfaces Information
Command: sudo ethtool -i eth6
Output:
Command: sudo ethtool -l eth6
Output:
Command: sudo ethtool -g eth6
Output:
Command: sudo ethtool -k eth6
Output:
Command: sudo ethtool -c eth6
Output:
Command: sudo ethtool -i eth7
Output:
Command: sudo ethtool -l eth7
Output:
Command: sudo ethtool -g eth7
Output:
Command: sudo ethtool -k eth7
Output:
Command: sudo ethtool -c eth7
Output:
Configuration
set firewall global-options state-policy established action 'accept'
set firewall global-options state-policy invalid action 'drop'
set firewall global-options state-policy related action 'accept'
set firewall ipv4 forward filter default-action 'accept'
set firewall ipv4 forward filter rule 5 action 'jump'
set firewall ipv4 forward filter rule 5 inbound-interface name 'eth1'
set firewall ipv4 forward filter rule 5 jump-target 'FW-WAN'
set firewall ipv4 forward filter rule 10 action 'jump'
set firewall ipv4 forward filter rule 10 inbound-interface name 'eth2'
set firewall ipv4 forward filter rule 10 jump-target 'FW-WAN'
set firewall ipv4 name FW-WAN default-action 'return'
set firewall ipv4 name FW-WAN rule 11 action 'return'
set firewall ipv4 name FW-WAN rule 11 destination port '1011'
set firewall ipv4 name FW-WAN rule 11 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 11 source address '198.51.100.1'
set firewall ipv4 name FW-WAN rule 12 action 'return'
set firewall ipv4 name FW-WAN rule 12 destination port '1012'
set firewall ipv4 name FW-WAN rule 12 protocol 'udp'
set firewall ipv4 name FW-WAN rule 12 source address '198.51.100.4'
set firewall ipv4 name FW-WAN rule 13 action 'return'
set firewall ipv4 name FW-WAN rule 13 destination port '1013'
set firewall ipv4 name FW-WAN rule 13 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 13 source address '198.51.100.7'
set firewall ipv4 name FW-WAN rule 14 action 'return'
set firewall ipv4 name FW-WAN rule 14 destination port '1014'
set firewall ipv4 name FW-WAN rule 14 protocol 'udp'
set firewall ipv4 name FW-WAN rule 14 source address '198.51.100.10'
set firewall ipv4 name FW-WAN rule 15 action 'return'
set firewall ipv4 name FW-WAN rule 15 destination port '1015'
set firewall ipv4 name FW-WAN rule 15 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 15 source address '198.51.100.13'
set firewall ipv4 name FW-WAN rule 16 action 'return'
set firewall ipv4 name FW-WAN rule 16 destination port '1016'
set firewall ipv4 name FW-WAN rule 16 protocol 'udp'
set firewall ipv4 name FW-WAN rule 16 source address '198.51.100.16'
set firewall ipv4 name FW-WAN rule 17 action 'return'
set firewall ipv4 name FW-WAN rule 17 destination port '1017'
set firewall ipv4 name FW-WAN rule 17 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 17 source address '198.51.100.19'
set firewall ipv4 name FW-WAN rule 18 action 'return'
set firewall ipv4 name FW-WAN rule 18 destination port '1018'
set firewall ipv4 name FW-WAN rule 18 protocol 'udp'
set firewall ipv4 name FW-WAN rule 18 source address '198.51.100.22'
set firewall ipv4 name FW-WAN rule 19 action 'return'
set firewall ipv4 name FW-WAN rule 19 destination port '1019'
set firewall ipv4 name FW-WAN rule 19 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 19 source address '198.51.100.25'
set firewall ipv4 name FW-WAN rule 20 action 'return'
set firewall ipv4 name FW-WAN rule 20 destination port '1020'
set firewall ipv4 name FW-WAN rule 20 protocol 'udp'
set firewall ipv4 name FW-WAN rule 20 source address '198.51.100.28'
set firewall ipv4 name FW-WAN rule 21 action 'return'
set firewall ipv4 name FW-WAN rule 21 destination port '1021'
set firewall ipv4 name FW-WAN rule 21 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 21 source address '198.51.100.31'
set firewall ipv4 name FW-WAN rule 22 action 'return'
set firewall ipv4 name FW-WAN rule 22 destination port '1022'
set firewall ipv4 name FW-WAN rule 22 protocol 'udp'
set firewall ipv4 name FW-WAN rule 22 source address '198.51.100.34'
set firewall ipv4 name FW-WAN rule 23 action 'return'
set firewall ipv4 name FW-WAN rule 23 destination port '1023'
set firewall ipv4 name FW-WAN rule 23 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 23 source address '198.51.100.37'
set firewall ipv4 name FW-WAN rule 24 action 'return'
set firewall ipv4 name FW-WAN rule 24 destination port '1024'
set firewall ipv4 name FW-WAN rule 24 protocol 'udp'
set firewall ipv4 name FW-WAN rule 24 source address '198.51.100.40'
set firewall ipv4 name FW-WAN rule 25 action 'return'
set firewall ipv4 name FW-WAN rule 25 destination port '1025'
set firewall ipv4 name FW-WAN rule 25 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 25 source address '198.51.100.43'
set firewall ipv4 name FW-WAN rule 26 action 'return'
set firewall ipv4 name FW-WAN rule 26 destination port '1026'
set firewall ipv4 name FW-WAN rule 26 protocol 'udp'
set firewall ipv4 name FW-WAN rule 26 source address '198.51.100.46'
set firewall ipv4 name FW-WAN rule 27 action 'return'
set firewall ipv4 name FW-WAN rule 27 destination port '1027'
set firewall ipv4 name FW-WAN rule 27 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 27 source address '198.51.100.49'
set firewall ipv4 name FW-WAN rule 28 action 'return'
set firewall ipv4 name FW-WAN rule 28 destination port '1028'
set firewall ipv4 name FW-WAN rule 28 protocol 'udp'
set firewall ipv4 name FW-WAN rule 28 source address '198.51.100.52'
set firewall ipv4 name FW-WAN rule 29 action 'return'
set firewall ipv4 name FW-WAN rule 29 destination port '1029'
set firewall ipv4 name FW-WAN rule 29 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 29 source address '198.51.100.55'
set firewall ipv4 name FW-WAN rule 30 action 'return'
set firewall ipv4 name FW-WAN rule 30 destination port '1030'
set firewall ipv4 name FW-WAN rule 30 protocol 'udp'
set firewall ipv4 name FW-WAN rule 30 source address '198.51.100.58'
set firewall ipv4 name FW-WAN rule 31 action 'return'
set firewall ipv4 name FW-WAN rule 31 destination port '1031'
set firewall ipv4 name FW-WAN rule 31 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 31 source address '198.51.100.61'
set firewall ipv4 name FW-WAN rule 32 action 'return'
set firewall ipv4 name FW-WAN rule 32 destination port '1032'
set firewall ipv4 name FW-WAN rule 32 protocol 'udp'
set firewall ipv4 name FW-WAN rule 32 source address '198.51.100.64'
set firewall ipv4 name FW-WAN rule 33 action 'return'
set firewall ipv4 name FW-WAN rule 33 destination port '1033'
set firewall ipv4 name FW-WAN rule 33 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 33 source address '198.51.100.67'
set firewall ipv4 name FW-WAN rule 34 action 'return'
set firewall ipv4 name FW-WAN rule 34 destination port '1034'
set firewall ipv4 name FW-WAN rule 34 protocol 'udp'
set firewall ipv4 name FW-WAN rule 34 source address '198.51.100.70'
set firewall ipv4 name FW-WAN rule 35 action 'return'
set firewall ipv4 name FW-WAN rule 35 destination port '1035'
set firewall ipv4 name FW-WAN rule 35 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 35 source address '198.51.100.73'
set firewall ipv4 name FW-WAN rule 36 action 'return'
set firewall ipv4 name FW-WAN rule 36 destination port '1036'
set firewall ipv4 name FW-WAN rule 36 protocol 'udp'
set firewall ipv4 name FW-WAN rule 36 source address '198.51.100.76'
set firewall ipv4 name FW-WAN rule 37 action 'return'
set firewall ipv4 name FW-WAN rule 37 destination port '1037'
set firewall ipv4 name FW-WAN rule 37 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 37 source address '198.51.100.79'
set firewall ipv4 name FW-WAN rule 38 action 'return'
set firewall ipv4 name FW-WAN rule 38 destination port '1038'
set firewall ipv4 name FW-WAN rule 38 protocol 'udp'
set firewall ipv4 name FW-WAN rule 38 source address '198.51.100.82'
set firewall ipv4 name FW-WAN rule 39 action 'return'
set firewall ipv4 name FW-WAN rule 39 destination port '1039'
set firewall ipv4 name FW-WAN rule 39 protocol 'tcp'
set firewall ipv4 name FW-WAN rule 39 source address '198.51.100.85'
set firewall ipv4 name FW-WAN rule 40 action 'return'
set firewall ipv4 name FW-WAN rule 40 destination port '1040'
set firewall ipv4 name FW-WAN rule 40 protocol 'udp'
set firewall ipv4 name FW-WAN rule 40 source address '198.51.100.88'
set interfaces ethernet eth0 address 'dhcp'
set interfaces ethernet eth0 description 'MGMT'
set interfaces ethernet eth0 hw-id '06:cb:ed:f4:fd:e9'
set interfaces ethernet eth0 mtu '1500'
set interfaces ethernet eth1 address 'dhcp'
set interfaces ethernet eth1 description 'TREX1'
set interfaces ethernet eth1 dhcp-options no-default-route
set interfaces ethernet eth1 hw-id '06:e8:91:41:20:a9'
set interfaces ethernet eth1 mtu '1500'
set interfaces ethernet eth2 address 'dhcp'
set interfaces ethernet eth2 description 'TREX2'
set interfaces ethernet eth2 dhcp-options no-default-route
set interfaces ethernet eth2 hw-id '06:ff:9e:d9:7e:47'
set interfaces ethernet eth2 mtu '1500'
set interfaces loopback lo
set protocols static route 16.0.0.0/8 next-hop 10.0.11.21
set protocols static route 48.0.0.0/8 next-hop 10.0.12.21
set service ntp allow-client address '127.0.0.0/8'
set service ntp allow-client address '169.254.0.0/16'
set service ntp allow-client address '10.0.0.0/8'
set service ntp allow-client address '172.16.0.0/12'
set service ntp allow-client address '192.168.0.0/16'
set service ntp allow-client address '::1/128'
set service ntp allow-client address 'fe80::/10'
set service ntp allow-client address 'fc00::/7'
set service ntp server time1.vyos.net
set service ntp server time2.vyos.net
set service ntp server time3.vyos.net
set service ssh client-keepalive-interval '180'
set service ssh port '22'
set system config-management commit-revisions '100'
set system conntrack modules ftp
set system conntrack modules h323
set system conntrack modules nfs
set system conntrack modules pptp
set system conntrack modules sip
set system conntrack modules sqlnet
set system conntrack modules tftp
set system console device ttyS0 speed '115200'
set system domain-name 'eu-south-1.compute.internal'
set system host-name 'VyOS-for-Performance-Tests'
set system sysctl parameter net.core.rmem_default value '134217728'
set system sysctl parameter net.core.rmem_max value '536870912'
set system sysctl parameter net.core.wmem_default value '134217728'
set system sysctl parameter net.core.wmem_max value '536870912'
set system syslog global facility all level 'info'
set system syslog global facility local7 level 'debug'
Performance Test
Test Command
cd /opt/trex/v3.06; ./ndr --stl --bi-dir --port 0 1 --force-map -v -x 10 -t 45 --profile stl/bench.py --prof-tun size={args.size},vm=cached --output /tmp/trex_summary.json
Test Results
Status :Calculation of max rate for DUT
Title :bench
Running Rate :11.83 Gbps
Running Rate (% of max) :100.00 %
Max Rate :11.83 Gbps
Drop Rate :70.98269 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :35.02 seconds
BW Per Core :8.58 Gbit/Sec @100% per core
TX PPS bi-directional :1.96 MPPS
RX PPS bi-directional :668 KPPS
TX Utilization :73.42 %
TRex CPU :92.29 %
Total TX L1 bi-directional :24.06 Gbps
Total RX L1 bi-directional :8.22 Gbps
Total TX L2 bi-directional :23.75 Gbps
Total RX L2 bi-directional :8.12 Gbps
Status :Drops happened, searching for NDR
Interval :[0,100]
Status :Drops beyond Desired rate occurred
Interval :[0,100]
Title :bench
Iteration :0
Running Rate :5.91 Gbps
Running Rate (% of max) :50.00 %
Max Rate :11.83 Gbps
Drop Rate :15.65898 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :60.02 seconds
BW Per Core :8.22 Gbit/Sec @100% per core
TX PPS bi-directional :973 KPPS
RX PPS bi-directional :823 KPPS
TX Utilization :36.58 %
TRex CPU :47.97 %
Total TX L1 bi-directional :11.98 Gbps
Total RX L1 bi-directional :10.12 Gbps
Total TX L2 bi-directional :11.83 Gbps
Total RX L2 bi-directional :9.99 Gbps
Distance from current Optimum :50.00 %
Status :Looking for NDR
Interval :[0,50]
Title :bench
Iteration :1
Running Rate :2.95 Gbps
Running Rate (% of max) :25.00 %
Max Rate :11.83 Gbps
Drop Rate :0.00000 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :120.05 seconds
BW Per Core :7.71 Gbit/Sec @100% per core
TX PPS bi-directional :487 KPPS
RX PPS bi-directional :486 KPPS
TX Utilization :18.25 %
TRex CPU :25.52 %
Total TX L1 bi-directional :5.98 Gbps
Total RX L1 bi-directional :5.98 Gbps
Total TX L2 bi-directional :5.9 Gbps
Total RX L2 bi-directional :5.9 Gbps
Distance from current Optimum :25.00 %
Status :Looking for NDR
Interval :[25,50]
Title :bench
Iteration :2
Running Rate :4.43 Gbps
Running Rate (% of max) :37.50 %
Max Rate :11.83 Gbps
Drop Rate :0.00019 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :180.07 seconds
BW Per Core :7.90 Gbit/Sec @100% per core
TX PPS bi-directional :729 KPPS
RX PPS bi-directional :730 KPPS
TX Utilization :27.40 %
TRex CPU :37.39 %
Total TX L1 bi-directional :8.98 Gbps
Total RX L1 bi-directional :8.98 Gbps
Total TX L2 bi-directional :8.86 Gbps
Total RX L2 bi-directional :8.86 Gbps
Distance from current Optimum :12.50 %
Status :Drops beyond Desired rate occurred
Interval :[37,50]
Title :bench
Iteration :3
Running Rate :5.17 Gbps
Running Rate (% of max) :43.75 %
Max Rate :11.83 Gbps
Drop Rate :4.47636 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :240.09 seconds
BW Per Core :8.07 Gbit/Sec @100% per core
TX PPS bi-directional :851 KPPS
RX PPS bi-directional :813 KPPS
TX Utilization :31.96 %
TRex CPU :42.68 %
Total TX L1 bi-directional :10.47 Gbps
Total RX L1 bi-directional :10.01 Gbps
Total TX L2 bi-directional :10.34 Gbps
Total RX L2 bi-directional :9.88 Gbps
Distance from current Optimum :6.25 %
Status :Drops beyond Desired rate occurred
Interval :[37,43]
Title :bench
Iteration :4
Running Rate :4.8 Gbps
Running Rate (% of max) :40.62 %
Max Rate :11.83 Gbps
Drop Rate :0.76304 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :300.11 seconds
BW Per Core :7.95 Gbit/Sec @100% per core
TX PPS bi-directional :790 KPPS
RX PPS bi-directional :779 KPPS
TX Utilization :29.68 %
TRex CPU :40.26 %
Total TX L1 bi-directional :9.73 Gbps
Total RX L1 bi-directional :9.59 Gbps
Total TX L2 bi-directional :9.6 Gbps
Total RX L2 bi-directional :9.47 Gbps
Distance from current Optimum :3.12 %
Status :Looking for NDR
Interval :[37,40]
Title :bench
Iteration :5
Running Rate :4.63 Gbps
Running Rate (% of max) :39.06 %
Max Rate :11.83 Gbps
Drop Rate :0.00047 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :360.12 seconds
BW Per Core :8.08 Gbit/Sec @100% per core
TX PPS bi-directional :763 KPPS
RX PPS bi-directional :763 KPPS
TX Utilization :28.65 %
TRex CPU :38.25 %
Total TX L1 bi-directional :9.39 Gbps
Total RX L1 bi-directional :9.39 Gbps
Total TX L2 bi-directional :9.27 Gbps
Total RX L2 bi-directional :9.27 Gbps
Distance from current Optimum :1.56 %
Status :Drops beyond Desired rate occurred
Interval :[39,40]
Title :bench
Iteration :6
Running Rate :4.73 Gbps
Running Rate (% of max) :39.84 %
Max Rate :11.83 Gbps
Drop Rate :0.18597 % of oPackets
Queue Full :0.00 % of oPackets
Elapsed Time :420.14 seconds
BW Per Core :8.01 Gbit/Sec @100% per core
TX PPS bi-directional :777 KPPS
RX PPS bi-directional :775 KPPS
TX Utilization :29.22 %
TRex CPU :39.31 %
Total TX L1 bi-directional :9.58 Gbps
Total RX L1 bi-directional :9.53 Gbps
Total TX L2 bi-directional :9.45 Gbps
Total RX L2 bi-directional :9.41 Gbps
Distance from current Optimum :0.78 %
Title :bench
Total Iterations :7
Max Rate :11.83 Gbps
Optimal P-Drop Rate :4.63 Gbps
P-Drop Rate (% of max) :39.06 %
Drop Rate at Optimal P-Drop Rate :0.00047 % of oPackets
Queue Full at Optimal P-Drop Rate :0.00 % of oPackets
Elapsed Time :455.17 seconds
BW Per Core :8.08 Gbit/Sec @100% per core
TX PPS bi-directional :763 KPPS
RX PPS bi-directional :763 KPPS
TX Utilization :28.65 %
TRex CPU :38.25 %
Total TX L1 bi-directional :9.39 Gbps
Total RX L1 bi-directional :9.39 Gbps
Total TX L2 bi-directional :9.27 Gbps
Total RX L2 bi-directional :9.27 Gbps
Distance from current Optimum :0.00 %
NDR(s) bi-directional :9.27 Gbps
Bench Run has finished :-)
{'BW per core [Gbit/sec @100% per core]': '8.08Gbit/Sec @100% per core',
'CPU Utilization [%]': '38.25',
'Drop Rate [%]': '0.0',
'Elapsed Time [Sec]': '455.17',
'Line Utilization [%]': '28.65',
'Max Rate [bps]': '11.83 Gbps',
'NDR points': ['9.27 Gbps'],
'OPT RX Rate [bps]': '4.63 Gbps',
'OPT Rate (Multiplier) [%]': '39.0625',
'OPT TX Rate [bps]': '4.63 Gbps',
'Queue Full [%]': '0.0%',
'RX [MPPS]': '763 KPPS',
'RX [bps]': '9.27 Gbps',
'TX [MPPS]': '763 KPPS',
'TX [bps]': '9.27 Gbps',
'Title': 'bench',
'Total Iterations': 6,
'Total RX L1': '9.39 Gbps',
'Total TX L1': '9.39 Gbps',
'latency': {},
'valid_latency': True}